percentage of african americans in low income housing
Let's cover e-collar sitting inside your Pathfinder app that will cause your e-collar not to work properly. The PATHFINDER app can display custom maps created in Mbtiles file format. Battery replacement by the customer during the first year of the 2-Year Limited Lifetime Warranty is not recommended. Dogtra does not assume any liability for the improper use of the iQ No Bark Collar. Download from ‘http://maperitive.net/’, and go to the Applications directory to unzip it. You can create 20 markers of each type (except Ruler and Direction). The Map view is recommended for long distance recall commands. the Google Maps application installed in order to see the directions to your destination. Accessories such as chargers, splitter cables, antennas, straps, and batteries are covered for the first year only. If you select an item on the list, it will not play on the map. Issues of replacement and refunds on units purchased less than 30 days from an authorized dealer must be addressed to the dealer directly. As an example, if you purchase a collar for $299.99, your guaranteed credit would be $29.99. covered and turns on when the sensor is exposed. Labor fees will be variable depending on the extent of the work required. – Make sure the receiver/collar is turned on. Hold the two red dots together 1. Safety Cut-off The constant stimulation will only activate for a maximum of 12 seconds. The response may be very subtle. Increase the stimulation until your dog responds, usually by a neck movement, head shaking, or looking over the shoulders. The Nick and Constant stimulation modes have stimulation levels from 1 to 100. The List view is recommended when training multiple dogs. Damages incurred to the unit due to improper battery installations are not covered under the warranty. To register your Dogtra product, log onto our website at www.dogtra.com, click on the warranty registration link, and fill out the required information. We recommend placing both contact points on your inner wrist, where the sensitivity is higher, in order to test the unit. The cost of shipping products under warranty back to Dogtra is the customer’s responsibility. The device color is used in the icon, tracks, compass needle, and in the Device List views. The new order will be used in the Map, Compass, and E-Collar tabs. When viewing shared GPS Connector devices, an icon ( or ) will be displayed along with the device name and distance from your position. • A new history file will begin recording when the Tracking Only Mode is turned on. If 2 minutes is selected, only the tracks up to 2 minutes will be displayed. * The TRX Collars, Shared Collars, Shared Friend E-Collars will not show on the List view. – Check to see if your fingers are touching the antenna as the range may decrease substantially. The stimulation level is controlled by the stimulation slider and stimulation increase/decrease buttons on the left and right of the slider. • Select between meters and yards. Dogtra DOES NOT cover the cost of shipping outside of the Continental United States. When Constant is selected, the stimulation will give continuous stimulation as long as the button is pushed, for up to 12 seconds. Press and hold the power button for up to 60 seconds. In the Alarm Settings for Dog Alerts, you can receive notifications for the Selected Collar and All Collars. Dogtra DOES NOT cover the cost of repairs and replacements due to misuse by. Hidden devices do not show up in the Map, Compass, and E-Collar tabs. This is what many people do not understand: the collar is not there to punish the dog, it … The orange button corresponds with the orange receiver/ collar and the gray with the black receiver/collar. 2. • Pop Up Message displays a pop up notification alert. • Rotate the map by using two fingers and applying a turning motion. Turn the transmitter on by pushing the ON/OFF Button located on the right side (not all transmitters have an On/Off button). Set the app to Tracking Only Mode while using the non-stimulation contacts to track only without training features. Or you can visit our website at www.dogtra.com for a service request form. Use the program that best suits your needs. * If the file is over 400MB, it will show a red square and cannot be downloaded. Registration must be completed within 30 days of purchase. tab, Device List, and Dog Status page. How the Dogtra YS600 No Bark Collar Works. This is not the case, and manufacturers have a variety of ways that the collars turn on. If the On/Off Button is released too early, the Receiver Indicator Light will begin flashing as normal. A metal pin inside the charging port should stand straight up and firm in the center. This saving is called tracking only mode. The current selected dog is displayed with an outline around their icon. For the first two years, coverage is for both parts and labor on warranty repair services. You can tap the marker to draw a line between the hunter and the marker. If the products purchased from an authorized dealer are after 30 days from the date of purchase, please send the units to Dogtra for service and repair. Pressing it 4. Once your dog’s skin returns to a normal condition, continue to use the collar and check your dog’s neck each time you use the unit. 1) Align the belt clip to the grooves on the back of the GPS Connector. Turn off sound alerts by. your computer. 3. You may also tap on a marker on the map to show the information on the Compass tab. Choose between the following options: • Google Map – Normal, • Offline Maps – Google Normal • Offline Maps – Google Satellite • Offline Maps – Google Terratin • Offline Maps – Custom Maps. • GPS settings are disabled for offline devices. You must stop and save the session in order to delete the Start Marker and End Marker. Damaged or broken casing may affect the waterproof guarantee on the unit. The removal of serial numbers from any Dogtra products will void the warranty. • To turn on the GPS Collar, press the Power button until the LED turns on. Add a ‘Truck’ marker to mark your car location when the app launches to draw a line between the ‘Truck’ and ‘ME’ markers. The notification will blink the ‘Collar Icon’ and app screen, or on the home or lock screen. The ergonomic low profile design means that the Dogtra ARC800 is very discreet and difficult to detect as an electric collar device unless closely examined. The warranty begins from the date of purchase. The update rate of devices that are shared with you cannot be changed. Dogtra does not provide loaner units or any form of compensation during the repair period. pushed, for up to 12 seconds to the corresponding collar. – The battery may be low. Once a valid Geo-fence is created, use the save button to save the Geo-fence on the map. • To turn on the GPS Collar, press the Power button until the LED turns on. Completed history files can be emailed as a KML file. It can be used with most Dogtra e-collar models (excluding the YS-300, YS-500 and 150NCP). The dog alerts for the Geo-fence are turned on by default and a notification will appear when a dog exits or enters the Geo-fence. If the button is not released after 12 seconds, the stimulation will automatically turn off as a safety feature. Both sharing and receiving PATHFINDER users must use the device sharing feature within close proximity to each other. This device is a mobile transmitter and receiver that uses an external antenna, to send and receive low levels of radio frequency (RF) energy for data communications. These collars are not designed to jolt your dog and scare or hurt it. Tri-Tronics is a stronger collar all together I will add and that I tested with a meter and reason for this is, on Dogtra collars the contacts are fatter, thus the electricity is spread throughout, unlike the Tri-Tronics are slimmer and more forward, electricity has no where to go except out! If the pin is wobbly, broken or missing, you will need to send the unit in for repair. Slide the device details page to view other devices. * The GPS Collar name and color can be edited from Menu/Device List/ Device/Edit. Press the share button to share and receive GPS Connector/Collar devices. In the Geo-fence setup window, you may delete the Geo-fence by tapping the center of the fence. The Dogtra YS600 delivers a static correction at the level you set. • The distance is displayed on the main tabs and device list. Select dogs and hunters from the list to display them on the compass. 1) Select the type of map you want to download. Use the more options button in the Device List to unhide a device. • A tone will be played to indicate that the GPS Collar is turning on or shutting down. Dogs can be selected using the dog list or in map view. – Be sure the strap is on the dog tight enough so that both contact points are, – The contact points may be too short for your dog’s thick or long coat. • Carefully inspect the unit for any missing parts or damage to the casing after use. The PATHFINDER comes equipped with standard 5/8” contact points that can be replaced with the non-stimulation contacts to disable the e-collar hardware. 120 seconds to reduce power consumption. I’ve used a Dogtra 2002 T&B 2-collar system with same features for over 10-years. The latest version of Mobile Atlas Creator can be downloaded from https://sourceforge.net/projects/mobac/files/. • Selected Collar: if you select a collar, the alarm will sound for that collar. Go to your menu tab then choose settings and then tracking only mode here. Google accounts can be created at ‘https://accounts.google.com/signup’. Send repair units to Dogtra Company / Repairs. Copyright Dogtra All Rights Reserved © 2020. 4) The test light will glow brighter at higher levels of stimulation and dimmer with lower levels. 4) You may select the map you downloaded in the Offline Map List. Leaving the iQ No Bark Collar in the same position on a dog’s neck for extended periods of time can cause skin irritation. I like these particular older Dogtra Collars and do not want to give them up. Dogtra recommends consulting your physician if you are going to use the e-collar near any types of medical devices. • Turning off Allow Alerts disables all alerts for the dog status. The offline map is displayed when cellular data/Wi-Fi is unavailable. I think they want $100.00 to fix each one, plus the shipping. – The charging pin may be damaged. * When saving to internal storage, save Mbtiles in the PATHFINDER /. htm’. – Your tolerance may be higher than your dog’s. com/drive/answer/2424384?hl=ko&co=GENIE.Platform%3DDesktop&oco=1’. Turn the Collar Receiver off. To use the created Mbtiles files in the PATHFINDER app, they must be placed in a specific repository on your smartphone. Long press anywhere on the map to open up the Marker Ruler Menu. This device must not be co-located or operated in conjunction with any other transmitter or antenna. Mobile Atlas Creator is free software that converts images used in maps into the Mbtiles file format. • All Collars: if you do not select a collar, the alarm will sound for all collars. Reorder how the devices show in the app. • Select between zoom, dogs, and no action. Let's get into the Pathfinder app and I'll show you how to turn it on and turn it off. Simply turn the dial on the top of the module to the level that matches your dog's drive. • Tilt the map by using two fingers and dragging the map up or down. Dogs and hunters are not displayed when hidden or offline. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and. Be careful not to over tighten. The Geo-fence points must be created in a clockwise order and cannot intersect. Each of these 3 dual collar sets has a beeper until severed in half at the base. The LED indicator light comes on, but I do not feel any stimulation. Joined by Pete Fischer, senior consultant for Dogtra, we discuss remote training collars at length. with another GPS Collar. 2) With a firm grip, screw on the belt clip’s Phillips head screws with a screwdriver. Devices shared will display the shared symbol on the device icon. He now can walk with us off leash and obeys when we tell him come and stay with us. If your product is not registered and a proof of purchase is not available at the time of service, Dogtra will estimate the age of the unit by the serial number. Trade in Any Electronic Collar, working or non-working, and Get Credit on Your Purchase! • Begin pairing mode on the phone to pair with the GPS Connector. 22912 Lockness Avenue, Torrance, CA 90501, U.S.A. It is NOT intended for use on people or on animals other than dogs. – The charging port must be clean prior to charging, clean out any dirt with a cotton swab and some rubbing alcohol. List view displays dogs in a list along with their distance from you. I use the page function to turn the dogs at a distance. Try one for yourself and you will see that the shock is very, very mild and is intended to be an alert, not a punishment. You may also create a ‘Truck” marker at the current location you are at when using the app. To comply with RF exposure compliance requirements, the device should be installed and operated with a minimum of 0.2m between the device and your body. Any feedback on them would be appreciated. A package I’ve been waiting for finally made it into my hands today. For the best range, hold the GPS Connector vertically above your head, and/or try moving to higher ground. On the other side of the transmitter is the blue On/ Off button which makes it quick and convenient to save battery when you’re taking a break. The GPS Connector device must be near your phone for proper operation, preferably less than 33 feet. Turn Offline Map Data on to use cellular data when available with Offline maps. Any unauthorized changes or modifications to this device that are not expressly approved by Dogtra will void the warranty and may void the user’s authority to operate the equipment. If the collar is a GPS tracking collar, you will want to make sure the collar is on the latest software version. The Geo-fence points can be edited before saving by holding and dragging the points to edit its location. • Single tap the map with two fingers to zoom out once. When starting a new Tracking History, the previous marker will still be on the map. 2) Select the stimulation level using the stimulation slider or stimulation. Take out the batteries and put them back in, making sure they are placed correctly. More than a little frustrating when the collar's off. 3) Select the area to show a green square with is less than 400MB. Use the ‘View All’ button to view all dogs and hunters. Rheostat Stimulation dial • On Android devices, the screen will turn off when the proximity sensor is. – Window : Execution Mobile_Atlas_Creator.exe, – Mac or linux : Execution Mobile_Atlas_Creator.jar. A preferred map view can be selected. Delete removes the pairing between the GPS Collar and GPS Connector, or removes from the app devices shared with you. The Dogtra GPS Application works with the Dogtra Pathfinder and brings GPS tracking and E-collar training right to your smartphone.